CLAMP,15mm - 24mm, Worm Gear

Cotiza las partes adicionales que te hagan falta en minutos, escríbenos al WhatsApp o visítenos en la sede de Medellín. Somos expertos en distribución, importación y comercialización de repuestos:

Ver lista completa

• SUMP
• BEARING ASSY,107.975 mm ID x 158.775 mm OD x 23.02 mm
• BUSHING
• DRAIN PLUG,3/4"-14
• 1 Speed, PTO, Start Year: 01-JAN-81
• NUT,Nut, 1/2-20 GR 5 ZND
• BEARING ASSY,41.27mm ID x 73.46mm OD x 19.63mm W
• NEEDLE BEARING
• BUSHING
• OIL SEAL,Square, 2.74mm Thk x 13.82mm ID, 75 Duro
• GASKET,0.58mm Thk
• BOLT,Hex, 1/2" - 20 x 2", Gr 5
• SCREW
• SCREW
• BOLT,Hex, 1/2" - 13 x 1 5/8", Gr 5
• NUT,5/8" - 18, Gr 5
• BOLT,Hex, 5/8"-18 x 2 1/8", G5
• BOLT,Hex, 5/8"-18 x 2 1/2", G5
• BOLT,Hex, 5/8" - 11 x 1 7/8", Gr 8
• BOLT,Hex, 5/8" - 11 x 1 7/8", Gr 8
• GASKET
• COVER
• COVER
• INDICATOR
• BOLT,Hex, 7/16"-14 x 7/8", G5, Full Thd
• GASKET
• COVER
• BEARING WASHER,7/16"
• BOLT,Hex, 7/16"-14 x 7/8", G5, Full Thd
• PROCURE LOCALLY
• GASKET
• O-RING,3.63mm Thk x 336.91mm ID
• O-RING,-246, 90 Duro, 4.484" ID x .139" Thk
• RETAINER
• SHIM
• SHIM,104.65mm ID x 146.8mm OD x 0.08mm Thk
• SHIM,104.65mm ID x 146.8mm OD x 0.25mm Thk
• GASKET
• PLATE
• COVER
• DOWEL
• COVER
• COVER
• GASKET,0.51mm Thk
• GASKET,0.51mm Thk
• BOLT,Hex, 3/8" - 16 x 3/4", Gr 5
• PLUG
• GASKET
• COVER
• COVER
• COVER
• GASKET
• ELBOW,5/16" Inverted Flare
• TUBE
• INDICATOR
• INDICATOR
• PLUG,1/4" - 18 x 0.48"
• PLUG,9/16" - 18 ORB
• O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro
• PLUG
• PIN
• SEAL
• BOLT
• SEAL
• HYD CONNECTOR
• NOT SERVICED SEPARATELY
• HYD. TUBE,16 mm OD x 108.7, 131.5 mm L
• WASHER
• O-RING,0.103" Thk x 0.487" ID, -112, Cl 6, 90 Duro
• PIN
• CUP PLUG,1.88"
• HYD. TUBE,30 mm ID x 42 mm OD x 193, 85.5 mm L
• WASHER
• O-RING,0.103" Thk x 1.487" ID, -128, Cl 5, 75 Duro
• RING,M35
• FILLER CAP
• HYD. TUBE,15.88 mm OD
• HYD. TUBE,15.88 mm OD x 64.5, 47.5 mm L
• HYDRAULIC HOSE
• CAP COVER
• HYD. TUBE,15.88 mm OD
• HYDRAULIC HOSE
• FILLER CAP
• PLUG,3/4"-14 (B)
• O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro
• BANJO BOLT,1 3/8"-12 x M70.1
• COPPER WASHER
• OIL SEAL,12.39mm ID x 23.72mm OD x 10.55mm Thk
• TEMPERATURE SWITCH
• SENSOR
• PRESSURE SWITCH